Amazon Bid Adjustments: Placement and Dynamic Bids Explained

Written by the BidVentor Editorial Team. Reviewed by Adeel Imrani, founder of BidVentor (14 years on Amazon, $30M+ ad spend, 12+ brands, 500+ products).
Quick answer
Amazon gives you two kinds of bid adjustment in Sponsored Products: a bidding strategy (down only, up and down, or fixed) that changes bids auction by auction, and placement adjustments that add a percentage to your bid for top of search or product pages. Both can help or hurt. Use the placement report to see where your ads convert at a cost you can afford, raise a placement only when the data supports it, and remember that adjustments can stack to produce a much higher effective bid than your base bid.
Key takeaways
- Bidding strategies work in real time, per auction. Placement adjustments are fixed percentages you set per campaign.
- Down only protects margin. Up and down chases more sales. Fixed keeps full control.
- Placement adjustments should follow the placement report, not hunches.
- Adjustments can combine, so check the effective bid, not just the base bid.
- Change one adjustment at a time and give it enough clicks to read.
The two kinds of adjustment
1. Bidding strategy (dynamic or fixed). Set at the campaign level, this tells Amazon how much freedom it has to change your bid in real time.
- Dynamic bids, down only: Amazon may lower your bid when a click looks less likely to convert to a sale. It never raises it above your set bid.
- Dynamic bids, up and down: Amazon may lower your bid when a click looks unlikely to convert, and raise it when a click looks more likely to convert.
- Fixed bids: Amazon uses your bid as you set it, with no real-time changes.
2. Placement adjustments. Also set at the campaign level, these raise your bid by a percentage for a given placement. In Sponsored Products the placements are top of search (first page), rest of search and product pages. Amazon allows adjustments of up to 900%.
Amazon documents the exact limits and how the numbers combine, so check its current guidance before relying on the arithmetic.
What the placements actually are
- Top of search (first page): the sponsored positions at the top of the first page of results. Usually the most visible and often the highest converting, with higher cost per click.
- Rest of search: sponsored positions further down the first page and on later pages. Usually cheaper, with lower conversion.
- Product pages: ads on other products’ detail pages. Behavior varies a lot by category and by how well your product compares to the one being viewed.
These are general tendencies, not guarantees. Your own placement report is the only reliable source for your products.
Reading the placement report
In Campaign Manager, open the placement report for a campaign and compare each placement on the same few numbers:
- Click-through rate: are shoppers noticing the ad?
- Cost per click: what does each placement cost?
- Conversion rate: do the clicks turn into orders?
- ACoS: the result, relative to your break-even.
Hypothetical example, with a break-even ACoS of 35%:
- Top of search: 12% conversion, $1.10 CPC, ACoS 28%.
- Rest of search: 7% conversion, $0.55 CPC, ACoS 33%.
- Product pages: 4% conversion, $0.60 CPC, ACoS 55%.
Here, top of search is both the most profitable and the best candidate for a placement adjustment. Product pages are above break-even and a candidate for a lower bid or fewer product-target campaigns, rather than a boost. If the numbers for your product look different, trust them.
How to set a placement adjustment
- Start at zero unless you already have placement data. You need a baseline.
- Wait for data. A few weeks of clicks per placement is more reliable than a few days.
- Raise a placement where ACoS is comfortably under target. Start modestly, such as 20 to 30%, and watch impressions, spend and ACoS.
- Re-check after another round of clicks. If ACoS holds, you can go further. If it climbs past target, step back.
- Avoid very large adjustments unless a placement is clearly and consistently profitable. A very high adjustment turns a small base bid into a large real bid.
Choosing a bidding strategy
- Dynamic bids, down only is a reasonable default for sellers focused on margin. It trims bids on clicks that look less likely to convert and cannot raise cost above your set bid.
- Dynamic bids, up and down suits terms that you already know convert profitably and where you want more position. It can raise your cost per click, so watch ACoS when you test it.
- Fixed bids suit campaigns where you want strict control, such as small tests or launch campaigns where you decide the spend yourself.
A common pattern is to run down only on discovery campaigns, fixed on tightly controlled tests and up and down on proven exact-match campaigns. For a deeper comparison, see our dynamic vs fixed bids guide.
How adjustments combine
This is where sellers get surprised. A bidding strategy can change your bid, and a placement adjustment can add a percentage on top. Two settings that each look modest can together produce an effective bid well above your base bid.
Hypothetical example: you set a base bid of $0.80 and a 50% top-of-search adjustment, so the top-of-search bid is $1.20. If you are also on dynamic bids up and down, Amazon may raise the bid further when it sees a likely sale. The effective bid for that auction could end up meaningfully above $1.20. That may be fine if the placement converts, but it means your maximum profitable bid, price × conversion rate × target ACoS, should be compared with the effective bid, not the base.
The practical fix is simple: when you add an adjustment, lower the base bid slightly or watch CPC for the next week.
When not to adjust
Adjustments are not always the answer. Skip them, or reverse them, in these cases:
- The campaign has little data. With only a handful of clicks per placement, any pattern you see is noise.
- The listing is the problem. If conversion is weak in every placement, raising one of them just buys more weak traffic. Fix reviews, copy and images first.
- You are changing other things at the same time. If you also change bids, budgets and targeting this week, you will not know what moved the result.
- The campaign is a deliberate launch push. If you are intentionally overspending to build sales history, a placement adjustment may be part of the plan, but write down why so that you do not undo it by accident later.
The simplest test is whether you can state, in one sentence, what you expect the adjustment to do and how you will know it worked. If you cannot, wait.
A tidy way to run it
- Set your bidding strategy per campaign type, and write it in the campaign name or notes.
- Check the placement report every few weeks for campaigns with enough clicks.
- Adjust one placement at a time and record the change.
- Compare ACoS and total sales before and after.
- Keep launch, defence and profit campaigns separate, so that an adjustment for one does not distort the others. Our guide to campaign segmentation explains how.
Where automation helps
Placement data across many campaigns is tedious to review by hand. BidVentor is an Amazon seller platform built to help you run your Amazon business without hiring a bigger team. BidVentor’s PPC tool connects to your Amazon Ads account through the Amazon Ads API (BidVentor is a verified Amazon Ads partner), or works from your bulk files if you prefer, and finds wasted spend, weak bids and negative-keyword gaps. The PPC tool includes a 4X ROAS guarantee; terms apply.
Frequently Asked Questions
What is a placement adjustment on Amazon?
It is a percentage you add to your bid for a given placement, such as top of search or product pages, set per campaign. It makes you more competitive in that position at a higher cost per click.
Should I use dynamic bids up and down or down only?
Down only is a sensible default to protect margin. Up and down can win more sales on proven terms but can raise cost per click, so test it and watch ACoS.
Do placement adjustments and dynamic bids stack?
They can combine, so the effective bid can end up well above the base. Compare the effective bid with your maximum profitable bid, and check Amazon’s documentation for how the numbers are calculated.
How much should I raise top of search?
Start modestly, such as 20 to 30%, and only on campaigns where the placement report shows it converts at an ACoS under your target. Re-check after more clicks.
How long before I judge a bid adjustment?
Give it at least a week and enough clicks in each placement. A few weeks is more reliable than a few days.
Sources and further reading
Related guides
- Dynamic vs fixed bids
- Segmentation strategies for Amazon PPC campaigns
- Seven bid management strategies
About the reviewer
Adeel Imrani is the founder of BidVentor. He has 14 years of Amazon experience, has managed $30M+ in ad spend and has worked on 12+ brands and 500+ products. Read more on his author page.
How we make this content
These guides are written by the BidVentor Editorial Team and reviewed by Adeel Imrani. Where we cite Amazon features or numbers, we link to Amazon’s own documentation. We update guides when Amazon’s tools or our guidance change, and we describe BidVentor’s features as they work today. See our methodology, or contact us with corrections.
Ready to Optimize Your Amazon PPC?
Connect your Amazon Ads account through the Amazon Ads API (BidVentor is a verified Amazon Ads partner), or upload a bulk file if you prefer. BidVentor is Amazon bid optimization software that reviews weak bids, wasted spend, and negative-keyword gaps. The PPC tool includes a 4X ROAS guarantee. Terms apply.
About BidVentor Editorial Team
The BidVentor Editorial Team is a dedicated collective of Amazon PPC and paid advertising experts. We empower brands to unlock scalable growth through data-driven strategies, precision campaign management, and a relentless focus on ROI. Our mission is to transform your ad spend into your most profitable channel.




