Amazon FBA Restock Report: How to Read It and When Not to Trust the Recommended Quantity

Written by the BidVentor Editorial Team. Last updated November 2026.
Quick answer
The Amazon FBA restock report (Seller Central, Inventory, then Inventory Planning, then Restock Inventory) tells you how many units Amazon thinks you should send and by when. It is a good starting point and a poor final answer. Its recommendation is built on your recent sales and the lead time and coverage settings in your account. That means it goes wrong in four predictable cases: right after a stockout, when your real lead time is longer than the setting, before a promotion or ad push, and when units are stuck in transfer or processing. Check those four things for your best seller, put a dollar figure on a stockout, and only then decide how much to ship.
Key takeaways
- The recommended replenishment quantity is a forecast, not a plan. It only knows what you have told it and what you sold recently.
- After a stockout, “units sold last 30 days” is low because you had nothing to sell, so the report tends to recommend too little and you run out again.
- Set your real lead time per SKU: supplier production plus freight plus Amazon check-in, not the default.
- A stockout costs twice: the profit you miss while out of stock, then the ad spend to win your rank back.
- Price one product’s stockout risk in dollars before you trust any restock number, ours included.
What the FBA restock report actually shows
Open the report and filter to one product you cannot afford to run out of. The columns that matter most are:
- Available, Inbound, FC transfer and FC processing. Available is what customers can buy now. Inbound is on its way to Amazon. FC transfer and FC processing are units already at Amazon but not yet sellable, often moving between fulfillment centres.
- Units sold last 30 days. The demand signal most of the recommendation leans on.
- Total days of supply (including units from open shipments). How long your stock lasts at the current sales rate, counting what is inbound.
- Alert. Usually “out of stock” or “low stock”.
- Recommended replenishment quantity and recommended ship date. Amazon’s answer to “how many, and when”.
On a calm month with steady sales, these numbers are often close enough. The trouble is that the products where a stockout hurts most are rarely calm.
Four cases where the recommended quantity is wrong
1. Right after a stockout
This is the most expensive mistake we see. If a product was out of stock for 10 of the last 30 days, its “units sold last 30 days” only reflects 20 selling days. The report reads that as weaker demand and recommends a smaller shipment. You send less, sell through it at your real pace, and run out again. Each stockout makes the next recommendation smaller.
The fix: work out your daily sales rate only from the days you were in stock. Divide units sold by in-stock days, not by 30.
2. Your real lead time is longer than the setting
The report can only plan around the lead time it is given. If your supplier needs 25 days to produce, freight takes 20 days and Amazon takes 7 to 10 days to check units in, your true lead time is over 50 days. If the account still assumes a shorter number, every recommended ship date arrives too late.
The fix: set lead time per SKU to the longest realistic chain, from purchase order to sellable units, and add a buffer for check-in delays in busy months.
3. A promotion or ad push is coming
The report forecasts from the past. It does not know you plan a Lightning Deal, a coupon, a new Sponsored Brands campaign or a bid increase next month. If your ads team is about to scale a product, the restock number will be short by roughly the extra units that push is meant to sell.
The fix: before any planned push, add the expected extra units to the recommendation yourself. Ad plans and restock plans should be read side by side, not by two people who never talk.
4. Units are stuck between “inbound” and “available”
Units in FC transfer or FC processing count towards your supply, but customers cannot buy them yet. If a large share of your stock sits there, the report can look healthy while the listing is close to empty.
The fix: when transfer and processing units are more than about a week of sales, plan from available stock plus inbound that is actually scheduled, not total supply.
How to check one product in 15 minutes
Do this for your best-selling product first, because that is where the dollars are.
- Count in-stock days. Look at the last 30 to 60 days and note how many days the product was actually buyable.
- Work out true daily sales. Units sold divided by in-stock days.
- Work out true lead time. Production plus freight plus check-in, in days.
- Find your reorder point. True daily sales times true lead time, plus safety stock. A simple safety stock is 7 to 14 days of sales, more if your supplier is unreliable.
- Compare. Put your number next to Amazon’s recommended quantity and ship date. If yours is higher and earlier, you have found the gap.
- Price the gap. Use the example below to turn it into dollars.
If you want a deeper method for how much to send, our guide on how much inventory to send to Amazon FBA walks through it step by step.
Example: what one stockout costs one product
This is an illustrative example, not client data.
Take a $32 kitchen product that sells 20 units a day when in stock and makes $9 profit per unit after fees and product cost.
- The restock report’s recommendation was based on a month with 8 out-of-stock days, so it assumed about 15 units a day instead of 20.
- The account’s lead time setting was 30 days. The real chain is 48 days.
- Result: the next shipment lands late and short, and the product is out of stock for 12 days.
Missed profit while out of stock: 12 days x 20 units x $9 = $2,160.
Then the recovery. After a stockout, organic rank usually slips and you lean on ads to win it back. Say you spend an extra $40 a day for 14 days above your normal budget, at an ACoS above break-even. Extra ad cost: 14 x $40 = $560.
Total for one stockout: $2,720. If this happens once a quarter, that is roughly $907 a month on this one product.
Running too thin has a cost too, even without a full stockout. Amazon charges a low-inventory-level fee when a product sits under 28 days of supply. From 1 February 2027, Amazon says that test will use shipments in the four weeks before and after the assessment date, so a late shipment can still trigger it.
Over-ordering is not free either, but it is changing. Amazon has announced that from 1 February 2027 the storage utilization surcharge goes away and storage becomes a single age-based monthly rate, where inventory that turns in under six months should be flat or lower. For a fast seller, a few extra weeks of cover is usually cheaper than a stockout. See our breakdown of the 2027 FBA fee changes for the details.
Why stockouts and fee errors usually travel together
When a product runs thin, sellers rush shipments, split them across more locations, and pay for faster freight. That is exactly when fee mistakes slip through: wrong dimensions on a re-measured unit, a fulfillment fee charged at a higher size tier, or inbound units that never get fully received. Nobody checks the fee line while they are fighting a stockout.
So when you price a restock problem, look at the fee side of the same product in the same week. Our Fee Sentry flags FBA fee overcharges and prepares claim drafts, so a messy restock month does not quietly become a fee leak as well. If you suspect units went missing on the way in, our guide to preventing FBA stockouts covers the inbound checks too.
When the restock report is good enough
You do not need to rebuild every SKU by hand. The report is usually fine when:
- the product had no stockout in the last 60 days,
- your lead time setting matches reality,
- no promotion or ad push is planned in the next lead time window, and
- transfer and processing units are small.
Spend your time on the products that fail one of those four tests. For most catalogues that is a short list, and it is where almost all the stockout dollars sit. For the products on that list, a tool that warns you early is worth more than a better spreadsheet. That is what Replenishment Alerts in BidVentor is for: it warns you when a product is heading for a stockout so you can ship before the shelf is empty. You can see how we approach restocking on our FBA replenishment page.
Frequently Asked Questions
Where do I find the FBA restock report?
In Seller Central, go to Inventory, then Inventory Planning, then Restock Inventory. You can view recommendations per SKU and download the report to check the columns yourself.
How accurate is Amazon’s recommended replenishment quantity?
It is reasonable for steady products with correct lead time settings. It tends to be too low right after a stockout, when your real lead time is longer than the setting, and before a promotion or ad push, because it forecasts from recent sales.
How do I calculate a reorder point for FBA?
Multiply your true daily sales (units sold divided by in-stock days) by your true lead time in days, then add safety stock of about 7 to 14 days of sales. Reorder when available plus inbound units fall to that number.
How much does an Amazon stockout really cost?
Add the profit you miss while out of stock to the extra ad spend needed to recover rank afterwards. In our illustrative example, a 12-day stockout on a product selling 20 units a day at $9 profit cost about $2,720 in total.
Should I send more inventory to avoid the low-inventory-level fee?
For fast sellers, usually yes. Amazon charges that fee when supply sits under 28 days, and from 1 February 2027 storage moves to a single age-based rate, so a few extra weeks of cover is often cheaper than running thin.
Your next step: find what one product is leaking
Pick one product today and do the maths above: the stockout profit you would lose, the recovery ad spend, any low-inventory-level fees and any fee overcharges on it. That is what this one product loses a month. In our example it was about $907.
Then put it next to the cost of fixing it. BidVentor is $19.99 per product per month for all six tools. That covers Replenishment Alerts; Fee Sentry, which flags FBA fee overcharges and prepares claim drafts; PPC optimization through the Amazon Ads API (we are a verified partner) plus bulk files, backed by a 4X ROAS guarantee on PPC (terms apply); and Buyer Blueprint, built for Amazon’s COSMO algorithm and Rufus. If your one product is leaking more than $19.99 a month, the tool pays for itself on that product alone.
A product that runs out often also has a conversion problem hiding underneath, and the review side is the easiest place to start. Run the free Lost Sales Scan: it reads all reviews for your product and your competitors, ranks the objections costing you sales, and turns them into listing, image and ad changes. You get one free analysis after you sign up. If you want the ad side checked next, see our Amazon PPC optimization tool.
Sources and further reading
Related guides
- How to prevent Amazon FBA stockouts
- How much inventory to send to Amazon FBA
- Amazon replenishment software: what to look for
How we make this content
These guides are written by the BidVentor Editorial Team. Where we cite Amazon features or numbers, we link to Amazon’s own documentation. We update guides when Amazon’s tools or our guidance change, and we describe BidVentor’s features as they work today. See our methodology, or contact us with corrections.
Ready to Optimize Your Amazon PPC?
Connect your Amazon Ads account through the Amazon Ads API (BidVentor is a verified Amazon Ads partner), or upload a bulk file if you prefer. BidVentor is Amazon bid optimization software that reviews weak bids, wasted spend, and negative-keyword gaps. The PPC tool includes a 4X ROAS guarantee. Terms apply.
About BidVentor Editorial Team
The BidVentor Editorial Team is a dedicated collective of Amazon PPC and paid advertising experts. We empower brands to unlock scalable growth through data-driven strategies, precision campaign management, and a relentless focus on ROI. Our mission is to transform your ad spend into your most profitable channel.




